Created on 12/15/2016
c
2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 1 of 7
MODEL
DJP
ISO 05 - X&Y: Into P
CAVITY: T-5A
Check, On P
Flow Control, Meter-In P
TECHNICAL DATA
Body Type Sandwich
Interface ISO 05 - X&Y
Body Features Into P
Stack Height 63 mm
Open Cavities 1
Cavity T-5A
Model Weight 0.79 kg.
MODIFIER
6061-T651 Aluminum, Buna-N
/S 65-45-12 Ductile Iron, Buna-N, Blackened
snhy.com/
DJP
MANIFOLD FACES
FACE GRID
NOTES
Stack height value in technical data table includes seal retainer plate.
This installation requires a retainer and seal kit which are purchased separately. See "Related Accessories" section.
For check valve application, use only with CX*A check valves - free flow nose to side.
Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port
type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port
type/size specified.
Model Code Example: DJP
CONFIGURATION OPTIONS
Created on 12/15/2016
c
2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 2 of 7
1 2 3 4
5 6 7 8
9 10 11 12
Face 2
Face 5
Created on 12/15/2016
c
2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 3 of 7
Face 6
Created on 12/15/2016
c
2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 4 of 7
Face 7
Created on 12/15/2016
c
2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 5 of 7
Face 8
Created on 12/15/2016
c
2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 6 of 7
Face 10
Created on 12/15/2016
c
2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 7 of 7
